home > Products > Actuators > Solid State Electronic > 3500R/3500L/3600R/3600L/3620R/3620L

3500R/3500L/3600R/3600L/3620R/3620L : Solid State Electronic Actuators

3500LB/3500RB/3620R/3620L

Each product of this series drives and controls a control valve, with a motor driven by a full-electronic controller upon receipt of a signal (4 to 20 m ADC) from the controller. A product of 3500 series, which is of high-end type, executes critical control by means of a brushless DC servo, a product of 3600 series or 3620 series providing superior cost performance executes control by an AC reversible motor. Furthermore, a product of 3620 series, which is of motor built-in type, provides excellent heat radiation effect. In addition, explosion-proofing approved models are also replete. See here for models and details of specification.

Specifications
  • See here for Table of torque and thrust force.
  • See here for Explosion-proof approved models and specification.
3500R Rotary stem motion type/3500L Linear stem motion type
Principal uses Control
Power Drive motor Brushless DC motor
Power supply Single phase 100V AC  50/60Hz
Power supply
Optional
Single phase 110/200/220V AC  50/60Hz
Motor rating Continuous
Control mechanism Input signal 4 to 20mA DC
Input signal
Optional
1 to 5V DC/4 to 12mA DC/12 to 20mA DC
Opening signal transmission
Optional
4 to 20mA DC with zero and span adjustment
Resolution 0.3% (3/1000)
Resolution Optional 0.1% (1/1000)
Zero adjust range +/-12.5%
Span adjust range 5 to 100%
Operation Either forward operation or reverse operation can be selected
Ancillary mechanism  Manual operation mechanism Dismountable handle type
Sequence output signal Output shaft clockwise turned position (3500R)
Output shaft lowered position (3500L)
Sequence output signal
Optional
Output shaft counterclockwise turned position (3500R)
Output shaft elevated position (3500L)
Overload protection With built-in overload protector
Space heater
Optional
* Please contact us for details, as this matter depends on the power supply voltage.
Conditions for installation Ambient temperature -10 to 50°
Ambient temperature
With space heater
-20 to 40°
Mounting position Should not be mounted in an inverted position from the maintenance face.
Body portion External sheath type Protection class IP55 or equivalent
Wiring port G1/2 (2 places)
Wiring port Optional Various adaptors can be mounted
Installation seat Conforms to ISO
3600R Rotary stem motion type/3600L Linear stem motion type
Principal uses Control
Power Drive motor AC reversible motor
Power supply Siingle phase 100V AC  50/60Hz
Power supply
Optional
Single phase 110/200/220V AC  50/60Hz
Motor rating 30 minutes
Control mechanism Input signal 4 to 20mA DC or 1 to 5V DC
Opening signal transmission 4 to 20mA DC
Resolution 0.8 to 1.0% (1/125 to 1/100)
Resolution Optional 0.4% (1/250)
Zero adjust range +/-25%
Span adjust range 20 to 100%
Operation Either forward operation or reverse operation can be selected
Ancillary mechanism Control position detection
Optional
Auxiliary limit switch (voltfree), maximum points of detection 2 places (3600R)
Manual operation mechanism Dismountable handle type
Overload protection With built-in thermal protector
Overload protection
Optional
Overload unit,
Torque switch on closed side (CW direction only,  3600R)
Space heater
Optional
*Please contact us for details, as this matter depends on the power supply voltage.
Conditions for installation Ambient temperature -10 to 50°
Ambient temperature
With space heater
-20 to 40°
Mounting position Should not be mounted in an inverted position from the maintenance face.
Body portion External sheath type Protection class IP55 or equivalent
Wiring port G3/4 (3600R) G1/2 (3600L) 2 places
Wiring port Optional Various adaptors can be mounted,
Terminal box (3600L)
Installation seat Conforms to ISO
3620R Rotary stem motion type/3620L Linear stem motion type
Principal uses Control
Power Drive motor AC reversible motor
Power supply Single phase AC100/110V  50/60Hz (+/-5%)
Power supply
Optional
Single phase AC200/220V  50/60Hz (+/-5%)
Motor rating 30 minutes
Control mechanism Input signal 4 to 20mA DC or 1 to 5V DC
Opening signal transmission 4 to 20mA DC
Resolution 0.5 to 1.0% (1/200 to 1/100)
Resolution
Optional
0.3% (1/300)
Zero adjust range +/-25%
Span adjust range 20 to 100%
Operation Either forward operation or reverse operation can be selected
Save function ON/OFF selection by select switch
Ancillary mechanism Control position detection
Optional
Auxiliary limit switch (voltfree), maximum points of detection 2 places
Manual operation mechanism With handle insertion hole
Overload protection With built-in thermal protector,
Torque switch (3620R is an option)
Space heater
Optional
* Please contact us for details, as this matter depends on the power supply voltage.
Conditions for installation Ambient temperature -10 to 50°
Ambient temperature
With space heater
-20 to 40°
Mounting position Should not be mounted in an inverted position from the maintenance face.
Body portion External sheath type Protection class IP55 or equivalent
Wiring port G1/2 (2 places)
Wiring port Optional Various adaptors can be mounted,
Terminal box
Installation seat Conforms to ISO